MikMek SubMicro Bedienungsanleitung PDF herunterladen (Seite 82)

SUPPORTED PROTOCOLS

(must use default port values).

While Boca does not support every Ethernet protocol, the printer supports a sufficient number of high level

protocols to function effectively as a network printer. Below is a list of supported and non-supported features of

the printer. More support may be added in the future as needed.

CATEGORY

SUPPORTED FEATURE

UNSUPPORTED FEATURE

Frames

Ethernet version 2 IEEE 802.3

Ping

Number of echo requests Loose source route along host - list

Buffer size Strict source route along host - list

Record route

Time to live

Timestamp

ARP

ARP request RARP request

ARP response RARP response

Dynamic RARP request

Dynamic RARP response

InARP request

InARP reply

ICMP

Echo Destination Unreachable

Echo Reply

Source Quench

Parameter Problem Redirect

Time Exceeded

Timestamp

Timestamp Reply

Information Request

Information Reply

Address Mask Request

Address Mask Reply

Ipv4

Internet Timestamp Loose Source and Record Route

Record Route Strict Source and Record Route

Stream Identifier Fragmented IP packets

Security - all levels accepted

TCP

MSS All others (SACK, echo, etc.)

HTTP

GET, POST HEAD

UDP

Supports DHCP datagrams Presently no other UDP datagrams

DHCP

Automatic or Dynamic IP allocation DHCP Release, DHCP Inform

Unsupported Protocols:

IPv6, SNMP, DNS, SMTP, TFTP, FTP, TELNET, IPP, DLC

Network ports (port monitors) supported:

Works with Microsoft Standard TCP/IP port - SNMP disabled

Works with HP Standard TCP/IP port - SNMP disabled

Works with Microsoft LPR port

PING UTITITY

You can use the MS-DOS Ping command for diagnostic testing and to verify the network connection.

• ping 10.0.0.192 will ping the network printer 10.0.0.192 four times.

NETWORK INTERFACES supported under TCP/IP

SUPPORTED INTERFACE

COMMENTS

Windows Socket API Bi-directional Raw TCP protocol between printer and Host (port 9100)

LPD/LPR Unidirectional LPD protocol data to printer (port 515)

All commands supported except “remove jobs”

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 134 135

Kommentare zu diesen Handbüchern

Keine Kommentare

MikMek SubMicro Bedienungsanleitung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen MikMek SubMicro